Adopted with Doppler-filter smooth algorithm and full-constellation tracking capability, S10 achieves 15cm pass-to-pass navigation accuracy without correction data input. It largely saves your cost of setting a base station or purchasing a CORS account.
With a standard communication serial port and NMEA-0183 messages output, the S10 receiver provides high compatibility for your system development
The S10 receiver integrates a GNSS antenna and GNSS module together, largely simplifying the system components. Users only need to install the receiver on the vehicle roof. No specific requirements for the mounted vehicles, the S10 is compatible with most tractor/vehicle models.
SIGNAL TRACKING
GPS: L1C/A
GLONASS: L1
BDS: B1I
Galileo: E1
QZSS: L1C
SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM
Cold start: < 40 s
Hot start: < 15 s
RTK initialization time: < 10 s
Signal reacquisition: < 1 s
ACCURACY
Single-point pass-to-pass: 15 cm
Single baseline RTK:
- 8 mm + 1 ppm Horizontal
- 15 mm + 1 ppm Vertical
SBAS:
- 0.6 m Horizontal
- 0.8 m Vertical
Velocity accuracy: ≤ 0.02 m/s
COMMUNICATION
Data Connector: 9-pin aviation connector to RS232
Bluetooth (optional): BT4.0, backward compatible with BT2.x, supports Windows/Android/IOS system
Data format: Binary, NMEA-0183
Correction data: RTCM 3.X
Baud rate: 9600~406800
ELECTRICAL
Power supply: 6 ~ 36V DC
Power consumption: ≤1.5 W
PHYSICAL
Size: Φ150mm×61.7mm
Weight: 0.64 kg
ENVIRONMENTAL
Operating Temperature: -45℃ to +75℃
Storage Temperature: -55℃ to +85℃
Waterproof & Dustproof: IP67
Shock: Survive from a 2m-drop
Humidity: 100% no condensing