Full-constellation tough signal tracking, robust anti-interference and advanced RTK algorithm, X1 Lite takes only a few seconds to get a stable fixed solution even in challenging environments like multipath, tree canopy, city canyons, etc.
Does ultra-versatile mean heavy and bulky? X1 Lite GNSS receiver gives the best answer. With Φ133.5 mm × 67 mm palmed size and 870g light weight, X1 Lite largely lights your burden in while keeping your best surveying experience.
Quitting removable batteries, X1 has optimized charging safety, waterproof capability and internal stacking design based on the internal battery design. 2.5 hours of fast charging via Type-C interface can support over 20 hours continuous working time. It can also be charged via power bank, realize charging on-the-go.
In order to meet different uses, X1 has integrated with NFC/Bluetooth for quick connection, Type-C USB for charging & upgrade, TNC connector for internal UHF, RS232 serial port to connect with external radio and WiFi/4G.
Accessed via the WiFi of X1 Lite, you can easily login the web page for static data download, firmware upgrade, device status check and configuration.
No matter it's rainy or dust weather, or you've accidently drop it onto the concrete or into the water, the durable housing of X1 Lite can always protect your device from damage.
SATELLITES TRACKING
Channels: 1408
BDS: B1I, B2I, B3I, B1C, B2a, B2b1
GPS: L1 C/A, L1C, L2P, L2C, L5
GLONASS: G1, G2, G3
Galileo: E1, E5a, E5b
QZSS: L1, L2, L5
IRNSS: L5
SBAS: WAAS, EGNOS, SDCM, BDSBAS, GAGAN
L-Band: Upgradeable
Cold start: <30s
RTK Initialization Time: <5s(typical)
RTK initialization reliability: >99.9%
Re-acquisition: <1s
ACCURACY
Standalone: - 1.5m Horizontally
- 2.5m Vertically
DGPS: - 0.4m Horizontally
- 0.8m Vertically
Static post-processing:
- 2.5mm+0.5ppm Horizontally
- 5mm+0.5ppm Vertically
RTK:
- 8mm+1ppm Horizontally
- 15mm+1ppm Vertically
SBAS: < 1.0 m 3D RMS
Time Accuracy: 20ns
Tilt surveying: < 2.5cm, within 60° tilt
DATA FORMAT
Data output format:
- NMEA-0183
- RINEX 3.02/3.04
- Binary format *.xyz
Data update rate: 1～50Hz selectable
Supported protocols: Ntrip client, Ntrip Server, Ntrip Caster, TCP
Correction data format:
- RTCM v3.3/3.2/3.1/3.0
- CMR
COMMUNICATION
4G modem (For X1 only):
- FDD-LTE B1/B3/B5/B7/B8
- TDD-LTE B38/B39/B40/B41
- TDSCDMA B34/B39
- WCDMA B1/B2/B5/B8
- GSM B2/B3/B5/B8
- CDMA1x/CDMA2000 BC0/BC1
UHF modem2:
- Working range: 5km – 15km3, in ideal environments
- Frequency range: 410-470MHz
- Protocol: TRIMATLK, TRANSEOT, SATEL, TRIMMARK3, etc.
- Channel spacing: 25KHz
- Transmit power: 0.5W/1W selectable
Bluetooth: BT4.0 dual mode
NFC: Support NFC connection
WiFi: 802.11 a/b/g/n/ac
Interface:
- 1 7-pin lemo port for RS232 transmission and power supply
- 1 SIM card slot for 4G (For X1 only)
- 1 TNC connector for UHF antenna
- 1 Type-C USB port for static data download & firmware upgrade
USER INTERACTION
Indicators: 4 LEDs indicating battery/charging, satellite tracking, correction data transmission, and 4G status/static recording
Button: 2 buttons for power and function
WebUI:
- Accessible via Wi-Fi
- Support configuration, status checking, data transfer, data storage and system upgrade
ELECTRICAL
Power consumption: 2.0 W4
Input voltage: DC 9~28V
Battery:
- 6700 mAh, over 20 hours working time
- Fast charge of 2.5 hours charging time
PHYSICAL
Size: Φ133.5 mm × 67 mm
Weight: 870 g
Storage: 8 GB5
Housing material: Magnesium-aluminum alloy
Speaker (optional): For voice broadcast of real-time status
ENVIRONMENTAL
Working temperature: -40 ℃ to + 65 ℃
Storage temperature: -55 ℃ to + 85 ℃
Humidity: 100% non-condensing
Waterproof & dustproof: IP68
Drop: Designed to survive a 2m drop onto concrete
Note:
1. The BDS B2b signal is reserved for future upgrade.
2. The enhanced UHF modem supports LoRa TX & RX as well as common UHF RX. To accommodate the need to use X1-Series as base for other common UHF rovers, SingularXYZ also offers regular UHF as an option. Please clarify your demands when placing the order.
3. The maximum working range of the enhanced UHF modem is 15km in ideal environments.
4. The power consumption of X1 varies with the different work modes.
5. Storage can be expanded to 32GB according to user demands.
