To ensure superior GNSS performance for multiple monitoring scenarios, SV100 is equipped with a high-precision GNSS engine for simultaneously tracking GPS, BDS, GLONASS, Galileo & QZSS. Embedded with multi-frequency anti-jamming technology, SV100 offers high quality and stable GNSS data.
Except for the external power supply, SV100 is also optional for a 6600mAh battery to avoid sudden power failure or voltage instability. With a 4G network as the backup for Ethernet, and an MTBF of over 20,000 hours, SV100 guarantees your ultra-stable continuous reference station.
The SV100 GNSS receiver shows high flexibility in data transmission and configuration. Users can easily access the web UI via Ethernet/WiFi or connect the bluetooth software for configuration. Then transfer the GNSS data via RS232 serial port, 4G, UHF or Ethernet.
Considering various working environments, the SV100 is protected with rugged housing. IP67 waterproof and dustproof design, suitable for outdoor work in all kinds of weather. Aluminum alloy housing and compact structure to avoid accidental drop damage.
Capable of tracking full constellations, coupled with choke ring design that can greatly reduce signal interference and IP67 waterproof & dustproof protection level, the SA500 can constantly provide high quality stable GNSS raw data 24/7 in all weather.
SATELLITES TRACKING
BDS: B1I, B2I, B3I, B1C, B2a, B2b1
GPS: L1 C/A, L1C, L2P, L2C, L5
GLONASS: L1, L2
Galileo: E1, E5a, E5b
QZSS: L1, L2, L5
Cold start: <30s
RTK Initialization Time: <5s(typical)
RTK initialization reliability: >99.9%
Re-acquisition: <1s
ACCURACY
Standalone:
- 1.5m Horizontally
- 2.5m Vertically
DGPS:
- 0.4m Horizontally
- 0.8m Vertically
Static Post Processing:
- 2.5 mm + 1 ppm Horizontally
- 5 mm + 1 ppm Vertically
RTK:
- 8mm+1ppm Horizontally
- 15mm+1ppm Vertically
Velocity Accuracy: 0.03m/s
Heading Accuracy: 0.2°/1m baseline
Time Accuracy: 20ns
DATA FORMAT
Data output format:
- NMEA-0183
- Binary format *.xyz
Data update rate: 1～50Hz selectable
Correction data format: RTCM v3.3/3.2/3.1/3.0
Network protocol: TCP, MQTT2, Ntrip Server, Ntrip Caster
COMMUNICATION
4G modem:
FDD-LTE B1/B3/B5/B7/B8
TDD-LTE B38/B39/B40/B41
TDSCDMA B34/B39
WCDMA B1/B2/B5/B8
GSM B2/B3/B5/B8
CDMA1x/CDMA2000 BC0/BC1
UHF modem (optional):
- Working range: 3 – 5 km
- Frequency range: 410-470MHz
- Protocol: TRIMATLK, TRANSEOT, SATEL, TRIMMARK3, etc.
- Channel spacing: 25KHz
- Transmit power: 0.5W/1.0W
Bluetooth: BT4.0 dual mode
WiFi: 802.11 a/b/g/n/ac
FTP: Support FTP download
NAT-DDNS: Support
INTERFACES
1 10-pin connector, including 1 RS232, 1 PPS output, 1 USB and power supply
1 RJ45 for Ethernet
1 TNC connector for GNSS antenna
1 TNC connector for UHF antenna
1 SMA connector for 4G antenna
1 SIM card slot
USER INTERACTION
LED Indicators: 4 LEDs indicating battery, satellite tracking, RTK status and network
WebUI:
- Accessible via Wi-Fi, Ethernet
- Support configuration, status checking, data transfer, data storage and system upgrade
Power Switch: Power switch on 10-pin cable
DATA STORAGE
Storage: 8 GB3, support loop recording
Storage format: RINEX3.0, Binary format *.xyz
ELECTRICAL
Power consumption: 3.5W
Input voltage:
- Without battery: 9 - 28V DC
- With internal battery: 9 - 22V
Battery (optional): 6600 mAh, support up to 13 hours working time.
MTBF: > 20000 hours
PHYSICAL
Size: 162 × 142 × 65 mm, including connectors
Weight: 1.05 kg without battery
Housing material: Magnesium-aluminum alloy
ENVIRONMENTAL
Working temperature: -40 ℃ to + 75 ℃
Storage temperature: -55 ℃ to + 85 ℃
Humidity: 95% non-condensing
Waterproof & dustproof: IP67
Drop: Designed to survive a 1m drop onto concrete
Vibration: MIL-STD-810
1. The BDS B2b signal is reserved for future upgrade.
2. The MQTT protocol is customizable.
3. Storage can be expanded to 32GB according to user demands.
