With just a single press to power on, the smart base will automatically enter its default radio mode and begins broadcasting correction data — no extra configuration or software required, simplifying field operation and minimizing setup time for greater efficiency.
With 1408 channels, the X1 Smart Base simultaneously tracks GPS, GLONASS, BDS, Galileo, QZSS and NavIC satellites — providing stable and reliable GNSS correction data to support your GNSS agricultural systems.
Connect via Wi-Fi to access the web interface of X1 smart base — easily view and manage historical base points, adjust default radio frequency and protocols.
With IP68 waterproof & dustproof design and magnesium-aluminum alloy housing, the X1 Smart Base withstands extreme weather and tough outdoor conditions — ensuring stable and reliable correction data transmission at all times.
Designed for precision agriculture, SAgro200 automated steering system delivers ±2.5cm pass-to-pass auto-steering accuracy for varieties of tractor types & farm work types, aiming to improve your agricultural resource utilization and productivity.
Compared with traditional laser land leveling, the GNSS-based SL100 will no longer be limited to the weather, distance or terrain, realizing 24/7 all-weather working while maintaining ±20mm elevation accuracy, greatly improving work efficiency.
The SAgro10 GNSS guidance system provides two positioning modes, sub-meter navigation accuracy in single-point smooth mode, and centimeter-level accuracy in RTK mode. It can easily be upgraded to an automatic steering system for your further needs.
SATELLITES TRACKING
Channels: 1408
GPS: L1C/A, L1C, L2C, L2P(Y), L5
BDS: B1I, B1C, B2a, B2I, B3I
GLONASS: G1, G2, G3
Galileo: E1, E5a, E5b, E6
QZSS: L1C/A, L1C, L2C, L5
NavIC: L5
SBAS: WAAS, EGNOS, SDCM, BDSBAS, GAGAN
L-Band: Upgradeable
Cold start: <30s
RTK Initialization Time: <5s(typical)
RTK initialization reliability: >99.9%
Re-acquisition: <1s
ACCURACY
Standalone:
- 1.5m Horizontally
- 2.5m Vertically
DGPS:
- 0.4m Horizontally
- 0.8m Vertically
Static post-processing:
- 2.5mm+0.5ppm Horizontally
- 5mm+0.5ppm Vertically
RTK:
- 8mm+1ppm Horizontally
- 15mm+1ppm Vertically
PPP:
- 5 cm Horizontally
- 10 cm Vertically
SBAS: < 1.0 m 3D RMS
Time accuracy: 20ns
Tilt surveying: < ±2.5cm, within 60° tilt
SMART BASE SETTINGS
UHF default frequency: 460.05 MHz
Base auto-matching range: Radius of 5 meters
Maximum base points record: 50 points
Base startup mode: Automatic startup upon power-on
Base configuration interface:
- Web UI via Wi-Fi connection
- Supports UHF frequency configuration and base point history viewing/editing
DATA FORMAT
Data output format:
- NMEA-0183
- RINEX 3.02/3.04
- Binary format *.xyz
Data update rate: 1～50Hz selectable
Correction data format:
- RTCM v3.3/3.2/3.1/3.0
- CMR
COMMUNICATION
4G modem: Supported on X1 and X1 Pro; not available on X1 Lite
UHF modem1:
- Working range: Up to 15km with optimal conditions
- Frequency range: 410-470MHz
- Protocol (TX & RX): LoRa
- Protocol(RX):TRIMATLK, SATEL,TRANSEOT,TRIMMARK3, etc.
- Channel spacing: 25KHz
- Transmit power: 0.5W - 2W selectable
Bluetooth: BT4.0 dual mode
NFC: Support NFC connection
WiFi: 802.11 a/b/g/n/ac
Interface:
- 1 7-pin lemo port for RS232 transmission and power supply
- 1 SIM card slot for 4G (X1 & X1 Pro only)
- 1 TNC connector for UHF antenna
- 1 Type-C USB port for static data download & firmware upgrade
USER INTERACTION
Indicators: 4 LEDs indicating battery/charging, satellite tracking, correction data transmission, and 4G status/static recording
Display: 1.1" OLED display (X1 Pro only)
Button: 2 buttons for power and function
WebUI:
- Accessible via Wi-Fi
- Support configuration, status checking, data transfer, data storage and system upgrade
ELECTRICAL
Power consumption: 2.0 W2
Input voltage: DC 9~28V
Battery: 6700 mAh
PHYSICAL
Size: Φ133.5 mm × 67 mm
Weight: 870 g
Storage: 8 GB3
Housing material: Magnesium-aluminum alloy
Speaker (optional): For voice broadcast of real-time status
ENVIRONMENTAL
Working temperature: -40 ℃ to + 65 ℃
Storage temperature: -55 ℃ to + 85 ℃
Humidity: 100% non-condensing
Waterproof & dustproof: IP68
Drop: Designed to survive a 2m drop onto concrete
Note:
1. The enhanced UHF base is not compatible with normal UHF rovers on the market. For different user needs, SingularXYZ also provides normal UHF as an option compatible with UHF of other brands. Please clarify your requirements when placing the order.
2. The power consumption of X1-Series varies with the different work modes.
3. Storage can be expanded to 32GB according to user demands.
