Combining full-constellation GNSS and inertial navigation data, the SV100 INS uses a tightly coupled algorithm to overcome signal obstructions in urban canyons and forests, achieving centimeter-level accuracy for reliable performance in challenging environments.
With a high-performance 6-axis IMU and next-gen fusion engine, the SV100 INS continues to deliver precise position, velocity, and orientation data even when GNSS signals are weak or blocked—such as in tunnels, ports, or under elevated roads.
Equipped with 8GB internal memory (expandable to 32GB), the SV100 INS supports loop recording of GNSS and INS data for reliable, long-duration operation and post-processing flexibility.
In addition to real-time data calculation and output, the SV100 INS also supports post-processing via SingularFusion Lite software*—offering advanced positioning algorithms, multiple motion models, and versatile data formats.
The IP67-rated, aluminum-alloy housing with MIL-STD-810 anti-vibration design ensures the SV100 INS performs reliably in tough field environments and demanding work conditions.
SATELLITES TRACKING
Channels: 1408
BDS: B1I, B2I, B3I, B1C, B2a, B2b
GPS: L1C/A, L1C, L2C, L2P(Y), L5
GLONASS: G1, G2, G3
Galileo: E1, E5a, E5b, E6
QZSS: L1C/A, L1C, L2C, L5
NavIC: L5
SBAS: WAAS, EGNOS, SDCM, BDSBAS, GAGAN
L-Band: Support
Cold start: <30s
RTK Initialization Time: <5s(typical)
RTK initialization reliability: >99.9%
Re-acquisition: <1s
ACCURACY
Standalone:
- 1.5m Horizontally
- 2.5m Vertically
DGPS:
- 0.4m Horizontally
- 0.8m Vertically
Static post-processing:
- 2.5mm+0.5ppm Horizontally
- 5mm+0.5ppm Vertically
RTK:
- 8mm+1ppm Horizontally
- 15mm+1ppm Vertically
PPP:
- 5cm Horizontally
- 10cm Vertically
SBAS: < 1.0 m 3D RMS
Velocity accuracy: 0.03m/s
Time Accuracy: 20ns
COMMUNICATION
4G modem:
- FDD-LTE B1/B3/B5/B7/B8
- TDD-LTE B38/B39/B40/B41
- TDSCDMA B34/B39
- WCDMA B1/B2/B5/B8
- GSM B2/B3/B5/B8
- CDMA1x/CDMA2000 BC0/BC1
UHF modem: Optional
Bluetooth: BT4.0 dual mode
WiFi: 802.11 a/b/g/n/ac
FTP: Support FTP download
NAT-DDNS: Support
Interface:
- 1 10-pin connector, including 1 RS232, 1 PPS output, 1 USB and power supply
- 1 RJ45 for Ethernet
- 1 TNC connector for GNSS antenna
- 1 TNC connector for UHF antenna
- 1 SMA connector for 4G antenna
- 1 SIM card slot
PHYSICAL
Size: 162×142×65 mm, including connectors
Weight: 1.05 kg without battery
Housing material: Aluminum alloy
INS PERFORMANCE
IMU Type: MEMS
Gyroscope:
- Bias Repeatability: 0.4°/h
- Range: ±350°/s
- Bias Instability: 1.6°/h (XY), 1.3°/h (Z)
- Angle Random Walk: 0.08°/√h(XY), 0.08°/√h (Z)
Accelerometer:
- Range: ±8g
- Bias Repeatability: 15 mg
- Bias Instability: 16 μg
- Velocity Random Walk: 35 mm/s/√h
IMU data update rate: 100Hz
DATA FORMAT
Data output format:
- NMEA-0183
- Binary format *.xyz
Data update rate: 1～200Hz selectable
Correction data format: RTCM v3.3/3.2/3.1/3.0
Network protocol: TCP, MQTT1, Ntrip Server, Ntrip Caster
USER INTERACTION
LED indicators: 4 LEDs indicating battery, satellite tracking, RTK status and network
WebUI:
- Accessible via Wi-Fi, Ethernet
- Support configuration, status checking, data transfer, data storage and system upgrade
Power switch: Power switch on 10-pin cable
ELECTRICAL
Power consumption: 3.5W
Input voltage:
- Without battery: 9 - 28V DC
- With internal battery: 9 - 22V
Battery (optional): 6600 mAh, support up to 13 hours working time.
MTBF: > 20000 hours
DATA RECORDING
Storage: RINEX 3.02/3.04, Binary format *.xyz
Storage format: 8 GB2, support loop recording:
ENVIRONMENTAL
Working temperature: -40 ℃ to + 75 ℃
Storage temperature: -55 ℃ to + 85 ℃
Humidity: 95% non-condensing
Waterproof & dustproof: IP67
Drop: Designed to survive a 1m drop onto concrete
Vibration: MIL-STD-810
1. The MQTT protocol is customizable.
2. Storage can be expanded to 32GB according to user demands.
All specifications are subject to change without notice.
